Experimental evaluation of dynamic vibration absorbers for vibration suppression in beam structure
An experimental study to lift water with a solar-driven bubble pump
Upgrading Sustainable Pipeline Monitoring with Piezoelectric Energy Harvesting
BC6NA monolayer as an ideal anode material for high-performance sodium-ion batteries
Utilizing nanotechnology to boost the reliability and determine the vertical load capacity of pile assemblies
Enhancing Heat Transfer in Porous Media Systems through Finned Cylinders: An Experimental Investigation
A novel trigeneration model using landfill gas upgrading process and waste heat recovery: Application of methanol, desalinated water, and oxygen production
New Design For a 2 kW Capacity Cooling System Powered by Exhaust Gases of a Diesel Engine
Nonlinear static behavior of three-layer annular plates reinforced with nanoparticles
Experimental study for comparison of thermal comfort and air age between two combined ventilation systems with chilled ceiling considering occupant density
Techno-economic analysis and optimization of near-zero energy and emission neighborhoods using biomass waste
Thermal and hydrodynamic management of a finned-microchannel heat sink applying artificial neural network
Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen
Mixed convection heat transfer and entropy generation of water inside a square vented enclosure with and without four vibrating cylinders in horizontal and vertical directions
Numerical Comparison of Thermal Comfort and Air Age Between Two Combined Ventilation Systems with Chilled Ceiling Considering Occupant Density
A Train with Automatic Functioning based on IoT with Solar Energy Source
Using magnesium oxide MgO nanoparticles to enhance heat transfer in a double pipe heat exchanger: A CFD study
Numerical study of natural convection in an annulus
Improving the Thermal Efficiency of the Parabolic Trough Solar Collector: An Overview
Moving load analysis on cross/angle-ply laminated composite nanoplates resting on viscoelastic foundation
Size-Dependent Free Vibration Analysis of Honeycomb Sandwich Microplates Integrated with Piezoelectric Actuators Based on the Modified Strain Gradient Theory
Wastewater treatment to improve energy and water nexus with hydrogen fuel production : Techno-economic and process analysis
A review on femoropopliteal arterial deformation during daily lives and nickel-titanium stent properties
Natural convecton in sinusoidal–corrugted enclosure utitiing silver/water nanoluid with different shapes of concentric inner cylinders
EXPERIMENTAL INVESTIGATION OF A HUMIDIFICATION-DEHUMIDIFICATION DESALINATION UNIT WORKING UNDER BAGHDAD CONDITIONS
Wind tunnel investigation and numerical analysis of fume behavior in the vicinity of rectangular building under moderate velocity wind
The metaheuristic optimization of the mechanical properties of sustainable energies using artificial neural networks and genetic algorithm: A case study by eggshell fine waste
Numerical study of fluid structure interaction of four flexible fins inside nanofliud-filled square enclosure containing hot circular cylinder
In a Vented Square Enclosure, the Effect of a Flexible Baffle Attached to a Solid Cylinder on Mixed Convection
Techno-Economic Analysis of dual ejectors solar assisted combined absorption cooling cycle
Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm
Comparison study of vertical and horizontal elastic wall on vented square enclosure filled by nanofluid and hexagonal shape with MHD effect
Experimental Investigation of Adding a Personal Ventilation System as Combined with Hybrid Ventilation System During Isolated Office Rooms
Highly efficient exchange of orbital angular momentum of light via electron spin coherence
In a Vented Square Enclosure, the Effect of a Flexible Baffle Attached to a Solid Cylinder on Mixed Convection
Computational investigation of magnetohydrodynamics convective heat transfer in I-shaped wavy enclosure considering various shapes of inner bodies filled with nanofluid–porous layers
Natural convection investigation under influence of internal bodies within a nanofluid-filled square cavity
A Systematic Review on Cardiovascular Stent and Stenting Failure: Coherent Taxonomy, Performance Measures, Motivations, Open Challenges and Recommendations
Optimization of mechanical wear resistance for recycled (Al-Mg-Si) reinforced SiC composite material using PM method
Quantum optics in visual sensors and adaptive optics by quantum vacillations of laser beams wave propagation apply in data mining
Optimized video internet of things using elliptic curve cryptography based encryption and decryption
MHD effects on natural convection in a U-shaped enclosure filled with nanofluid-saturated porous media with two baffles
Experimental study of condenser material in the air conditioning system
Development of a technique for surface treatment of a rotary machine
NATURAL CONVECTON IN SINUSOIDAL–CORRUGTED ENCLOSURE UTITIING SILVER/WATER NANOLUID WITH DIFFERENT SHAPES OF CONCENTRIC INNER CYLINDERS
Experimental and CFD Analysis of Two-Phase Forced Convection Flow in Channels of Various Rib Shapes
Effect of heat generation and heat absorption on natural convection of Cu-water nanofluid in a wavy enclosure under magnetic field
Design of Cooling System for an Automotive using Exhaust Gasses of Turbocharged Diesel Engine
Simulation of heat transfer processes in a diesel engine equipped with pistons coated by using Galvanic-plasma Method
Comprehensive Review on Double Pipe Heat Exchanger Techniques
Magnetohydrodynamics thermogravitational convective in a novel I-shaped wavy-walled enclosure considering various inner hot pipe locations
Review of natural convection within various shapes of enclosures
Impact of renewable energy sources integration with power grid systems through several methodology s
USING OF REINFORCING BY HYBRID FIBERS TO INCREASE EFFICIENCY OF UNSATURATED POLYESTER RESIN (SIROPOL 8340-PI) TO RESISTING MECHANICAL LOADS
Effect of Addition of Magnesium and Zinc to Obtain Optimal Mechanıcal Properties of Al-Mg-Zn Alloy
Application of Statistical Control Charts for Monitoring the Textile Yarn Quality
AN EXHAUSTIVE REVIEW ON NATURAL CONVECTION WITHIN COMPLEX ENCLOSURES: INFLUENCE OF VARIOUS PARAMETERS
Analysis of physical and mechanical properties of galvanic-plasma wear-resistant coatings
Experimental Study Of The Wear Resistance Of A Coated Rotor In A Rotary Engine Using The Galvanic Plasma Method
Comprehensive Review of Natural Convection Heat Transfer in Annulus Complex Enclosures
Natural Convection Heat Transfer for Adiabatic Circular Cylinder Inside Trapezoidal Enclosure Filled with Nanofluid Superposed Porous–Nanofluid Layer
USING OF ELECTROPLATING (DEMETAL POSITION) FOR REPAIR THE EXPIRE MACHINE ELEMENTS
Computational Fluid Dynamics Investigation of Buoyancy Driven Flow Between Circular Body and Wavy Enclosure Filled with Nanofluid/Porous Medium
Theoretical and practical study of possibility to decrease thermal stress in pistons of internal combustion diesel engine by using galvanic plasma modification
Experimental Investigation of Two-phase Fluid Flow over a Rectangular Obstructions Located Inside Enlarged Rectangular Channel
Experimental study of the honeycomb composite material under high velocity impact
NUMERICAL SIMULATION OF THE PARTIAL THERMAL ZONES INFLUENCE ON NATURAL CONVECTION HEAT TRANSFER INSIDE ENCLOSURE FILLED NANOFLUIDS
MOTION DETECTION FOR BUBBLE RISE OF AIR-WATER TWO-PHASE FLOW TO MEASURING VELOCITY BY USING IMAGE PROCESS TECHNIQUE
Numerical study of mixed convection nanofluid in an annulus enclosure between outer rotating cylinder and inner corrugation cylinder
Compensation of Power Quality using Solar-Powered Distributed Generation Interfaced by Fuzzy Logic Controlled Inverter to the Main Grid
On simulation of the natural convection heat transfer between circular cylinder and an elliptical enclosure filled with nanofluid [part I: the effect of mhd and internal heat generation/absorption]
NUMERICAL INVESTIGATION OF NATURAL CONVECTION HEAT TRANSFER IN A PARALLELOGRAMIC ENCLOSURE HAVING AN INNER CIRCULAR CYLINDER USING LIQUID NANOFLUID
Experimental Investigation For The Behavior Of Multi–Layered Target Under Projectile Impact
The Preparation of Aluminium Foam Using Powder Technology for Industrial Applications
Natural convection among inner corrugated cylinders inside wavy enclosure filled with nanofluid superposed in porous–nanofluid layers
Study of heat transfer in an Evaporator for air condition system
COMPUTATIONAL INVESTIGATION OF CONJUGATE HEAT TRANSFER IN CAVITY FILLED WITH SATURATED POROUS MEDIA
Numerical investigation of conjugate natural convection heat transfer in a square porous cavity heated partially from left sidewall
Numerical Simulation for Conjugate Natural Convection in a Partially Heated Rectangular Porous Cavity
Effect of partially thermally active wall on natural convection in porous enclosure
Effect of Adiabatic Circular Cylinder on the Natural Convection Heat Transfer Characterizes in a Porous Enclosure
Studying the effect of alumina on the mechanical properties of aluminum alloy prepared from waste using powder metallurgy
Numerical analysis of flow and heat transfer enhancement in a horizontal pipe with P-TT and V-Cut twisted tape
Numerical study of entropy generation and natural convection heat transfer in trapezoidal enclosure with a thin baffle attached to inner wall using liquid nanofluid
The Effects of the Temperatures on the Performance of the Gas Turbine
studying the importance of simulation programs as a tool in scientific laboratories.
POWER QUALITY COMPENSATION FOR GRID INTERCONNECTED DISTRIBUTION SYSTEM INTERFACING INVERTER WITH (FLC)
EXPERIMENTAL AND THEORETICAL ANALYSIS OF SURGE IN THE CENTRIFUGAL COMPRESSOR
Experimental and computational investigation of dynamic effects in a high speed centrifugal pump
using of fiber composite of polypropyle to manufacturing cars bumpers
An Experimental and Numerical Investigation of the Performance and Dynamic Effects of a Shrouded Centrifugal Pump, Part 1
Effect of Inorganic Flame Retardants Addition on Thermal Properties of Advanced Composite Materials